|
|
IOMAX
The IOMAX will connect to the MAXp series of motion controllers via our
120-pin cable. IOMAX contains screw terminals for easy custom wiring and is
equipped with over current circuitry on the supply voltage. The IOMAX is
compatible with the MAXp family of motion controllers. An additional 25 pin
connector is provided to accommodate its I/O signals.
|
|
|
IOvMAX
The IOvMAX will connect to the MAXv series of motion controllers via
three SCSI cables, two 68-pin and one 50-pin. IOvMAX contains screw terminals
for easy custom wiring and is equipped with over _____current circuitry on
the supply voltage.
|
|
|
IO68
The IO68 connects directly to the PC68 via a 68-pin, standard,
SCSI-3cable which will keep costs at a minimum. It is available in 2 versions:
the IO68-M for use as a standard breakout module with any PC68 or PCIx; and
the IO68-I for use as an IO signal breakout module when used with a Px610
PC68 Series expansion module.
|
|
|
IO58
The IO58 will connect
directly to any Oregon Micro Systems PC58 motion controller via our 100-pin
cables simplifying system prototyping and integration. The IO58 is
compatible with the PC58 and VME58 motion controllers.
|
|
|
IO38
The IO38 will connect to any Oregon Micro Systems PC46, or PC48
motion controller via our 80-pin cables - simplifying system prototyping
and integration.
|
